WiInspire

WiInspire - Wifi Air Quality Datalogger

Description

The WiInspire datalogger allows continuous monitoring of CO2 concentration and ambient temperature and humidity levels in indoor spaces. Equipped with WiFi communication, it uses standard and open protocols that make it essential in projects where interoperability is paramount.
Together, WiInspire and its management platform provide a comprehensive solution for environmental optimization, adding information on thermal sensation and outdoor weather data, as well as user-configurable alerts. Together, they facilitate the analysis and visualization of data from all connected devices, presenting the information in a clear and accessible way for better decision making.

Technical specifications

Temperature sensor: -20 to 60ºC
Humidity sensor: 0 to 100%
CO2 sensor: 400 to 2000ppm
2.4GHz WiFi Communication
Power supply 12V 1A
Compatible with third-party platforms

FAQ

To request additional documentation, write to soporte@odins.es

General Questions

What types of analog sensors can I connect to the device?

There are a wide variety of sensors with analog outputs on the market, but the most common outputs are 0-10V and 4-20mA, which are supported by all our devices. Some of them are capable of measuring other less standard values. To find out more, consult the specific manual for that device.

Can I connect a sensor with PNP output to the device?

Not directly, the digital inputs of the devices are of potential-free type or NPN type. Therefore, if we want to connect a sensor with PNP output, we must use an intermediate element such as a relay to convert to NPN.

Are the device outputs PNP or NPN?

Devices that have digital outputs are of the open collector type, therefore they do not provide voltage to their output, but rather close to GND, therefore they are of the NPN type.

How many SDI-12 probes can I connect?

The SDI-12 standard can manage dozens of addresses on a single bus, but each device is limited by the available memory, CPU and power resources. For this reason, 2 probes can be connected to Mex03, 8 probes to Mex06 and 16 probes to IPex12.

What is the maximum distance I can connect an SDI-12 probe?

The standard indicates up to 60 meters, although this will always depend on the installation location and the cable used.

What is the maximum cable length you can use for analog sensor?

It depends on the section of the cable used, but if the output is by voltage, an adequate section must be guaranteed to avoid a significant drop in the cable that affects the reading. If a large distance needs to be covered (tens of meters), it is better to use a sensor with a 4-20mA output, since it avoids the problem of voltage drops in the cable and is also more immune to external interference.

I received a communication failure alert, what's happening?

Normally, and especially with wireless communication systems, there are connection drops due to the network, temporary loss of coverage, weather conditions, etc. This can cause the device to stop communicating with the platform for a few hours, but the device continues to function and record data, so as soon as it regains connection it will send all the stored information.

Do you need help?
Fill out the form and we will
we will be able to contact you.

Our customer service hours are Monday to Thursday from 08:00 to 17:00, Friday from 08:00 to 15:00. We will try to respond to you as soon as possible.

I wish to receive information about products, services, offers or recommendations by email or telephone

I have read and accept the Privacy Policy

I have read and understand the information regarding the use of my personal data explained in the Odin Solutions Privacy Policy. You can exercise your right of access, rectification, deletion and portability by emailing protecciondedatos@odins.es.

Water

Air quality

Container Management

Security

Aquaculture

Cattle raising